Hitlog & InBattle WN8 Calculator

[Esmiley]

I have a problem, it don't appear when im inbattle. I can have both normal hitlog and this one on at the same time? Or i need to un-choose the normal hitlog for can run this one?

[Almace]

Can have both active at the same time, at least for me it works.

 

 

E: This is the hitlog / damage panel combo I use.

[Esmiley]

Omg i found it, the issue is that i allways use the full stadistics and it is under them... Its possible to change the location of this mod ?

[Almace]

Omg i found it, the issue is that i allways use the full stadistics and it is under them... Its possible to change the location of this mod ?

You can edit the expD.json (located in WoT > res_mods > 0.9.2 > scripts > client > mods) with notepad++ and change the parameters for x(horizontally) and y (vertically), in order to adjust the position of the mod.

[Esmiley]

How can i know the numbers for put in X and Y ?

i have 1680x1050 resolution

[Almace]

Well, I don't know where your wn8 hitlog is located..

 

If it's too much left, then increase the x value, in order to put it more to the right.

Like if x = 300 change that to 350 or 400 and see if that was enough (with a replay).

[Esmiley]

After arround of 8 trys i customized the possition perfectly and writed the coordinates for when i'll install future versions.

 

Lots of thanks

[Almace]

You're welcome. Glad you could be helped.

 

You may also read up http://aslain.com/index.php?/topic/66-using-your-own-mods-with-the-installer/ and see if you understand the new-ish feature of the installer.

With it's help you can make it so that modified scripts will be installed automatically each time you run the installer.

 

You can test it by putting this file (the whole .zip file, don't unpack it) into Aslains_Custom_mods folder and replace the expD.json in it (which is my own) with your modified one; and then run the installer and a replay to check the position.

 

mod1.zip