Mooncalled Posted January 2, 2017 Posted January 2, 2017 At least it's not working for me. I tried it earlier with OMC Modpack and it works. Switch back to your mod pack because yours is just better even without the Armor Pen. _Aslain_logs.zip python.log Quote
Administrator Aslain Posted January 2, 2017 Administrator Posted January 2, 2017 6 minutes ago, Mooncalled said: At least it's not working for me. I tried it earlier with OMC Modpack and it works. Switch back to your mod pack because yours is just better even without the Armor Pen. _Aslain_logs.zip python.log Thanks, checking it. Quote
Administrator Aslain Posted January 2, 2017 Administrator Posted January 2, 2017 Cannot reproduce this, I have armor penetration in both arcade and sniper mode. Why you don't have it, no clue, I see no reason for this issue. Maybe try the other armor penetration from Battle Observer? Quote
Mooncalled Posted January 2, 2017 Author Posted January 2, 2017 Here are the logs for just having PMOD Amor Pen, but no other PMODs installed. I'll try it with the battle observer and no PMODs. _Aslain_logs.zip python.log Quote
Administrator Aslain Posted January 2, 2017 Administrator Posted January 2, 2017 20 minutes ago, Mooncalled said: Here are the logs for just having PMOD Amor Pen, but no other PMODs installed. I'll try it with the battle observer and no PMODs. _Aslain_logs.zip python.log Still cannot reproduce your problem, armor indicator is there. Quote
Mooncalled Posted January 2, 2017 Author Posted January 2, 2017 Battle Observer same issue. Am I missing something with my settings? Should I uninstall and try fresh? python.log _Aslain_logs.zip Quote
Administrator Aslain Posted January 2, 2017 Administrator Posted January 2, 2017 Even your aim circle from harpoon looks like wot default. It should have own indicator telling armor thickness. Quote
Mooncalled Posted January 2, 2017 Author Posted January 2, 2017 Allrighty then. I'm just going to reinstall. Even when I run the stock WoT sights I still don't get the pen indicator. I'll check back in after the reinstall. Thank you for looking into it. Quote
Administrator Aslain Posted January 2, 2017 Administrator Posted January 2, 2017 It makes no sense to me why you are not having any armor indicator. Your python logs are rather free of serious bugs. Maybe try to pick a minimal mod setup to see if it works for you at all. Try to install only Battle Observer and no other mods, or only PMOD - in both select armor penetration indicator. However if you even don't see WoT's built indicator then maybe it's time to ask WG support. Btw. have you tried to clean up WoT cache? Worth a try, it's recommended step in troubleshooting anyway. Quote
bubs79 Posted January 3, 2017 Posted January 3, 2017 the armor calculator from armogemen isn't working ive enabled it in the battle observer config file like I use to and its not showing when I aim at an enemy tank _Aslain_logs.zip python.log Quote
Administrator Aslain Posted January 3, 2017 Administrator Posted January 3, 2017 Cannot reproduce, I can see all penetration indicators. Maybe try to not install Battle Observer at all, and pick PMODs indicator only. Quote
bubs79 Posted January 3, 2017 Posted January 3, 2017 (edited) On 03/01/2017 at 5:32 PM, Aslain said: Cannot reproduce, I can see all penetration indicators. Maybe try to not install Battle Observer at all, and pick PMODs indicator only. @aslain one thing I have noticed is , in the middle of the crosshair I see the word light, wat is that ? as when I start a game I see the words light heavy and medium flickering at the right side of cross hair, when I switch to sniper its gone and I never see the words again even when highlighting a tank . any ideas on that? Edited January 5, 2017 by bubs79 Quote
Administrator Aslain Posted January 3, 2017 Administrator Posted January 3, 2017 BO: res_mods\configs\mod_battle_observer\default_Armagomen\armor_calculator.json Quote
bubs79 Posted January 3, 2017 Posted January 3, 2017 (edited) 10 minutes ago, Aslain said: BO: res_mods\configs\mod_battle_observer\default_Armagomen\armor_calculator.json I noticed theres minimal one there , wats that for?? I'm gonna try the mod on its own to see if it works update tried it on its own still not working Edited January 3, 2017 by bubs79 Quote
Administrator Aslain Posted January 3, 2017 Administrator Posted January 3, 2017 13 minutes ago, bubs79 said: I noticed theres minimal one there , wats that for?? I'm gonna try the mod on its own to see if it works update tried it on its own still not working Never tried that minimal version, I can imagine it's reskinned Armagomen with less option enabled or something like this. Quote
bubs79 Posted January 3, 2017 Posted January 3, 2017 (edited) 43 minutes ago, Aslain said: Never tried that minimal version, I can imagine it's reskinned Armagomen with less option enabled or something like this. ive tried just with armor calculator just on its own everything in armogemen unticked still no joy , very weird update I downloaded the mod from the authors site , and still no joy Edited January 3, 2017 by bubs79 Quote
Administrator Aslain Posted January 3, 2017 Administrator Posted January 3, 2017 What about the other penetration indicators, does the one in Harpoon aim circle works for you? How about pmod ? Try them exclusively to make sure, it's not Battle Observer but something bigger. Quote
bubs79 Posted January 3, 2017 Posted January 3, 2017 1 minute ago, Aslain said: What about the other penetration indicators, does the one in Harpoon aim circle works for you? How about pmod ? Try them exclusively to make sure, it's not Battle Observer but something bigger. I ununstalled the mod pack and cleaned everything out , then downloaded the mod from the athorsite , so only had armogomen on and it still didn't work something on my end isn't working for some reason, I'm currently reinstalling the mod pack and and will try pmods one Quote
Administrator Aslain Posted January 3, 2017 Administrator Posted January 3, 2017 Just now, bubs79 said: I ununstalled the mod pack and cleaned everything out , then downloaded the mod from the athorsite , so only had armogomen on and it still didn't work something on my end isn't working for some reason, I'm currently reinstalling the mod pack and and will try pmods one It's not just yourself, Mooncalled is also having this issue. Quote
bubs79 Posted January 3, 2017 Posted January 3, 2017 (edited) 3 hours ago, Aslain said: It's not just yourself, Mooncalled is also having this issue. yeh that is true , wonder what is causing it not to work , weird how my set up worked on yours though lol I'm gonna try something , I'm gonna try moving it it by the config file , it cud actually be working but its off the screen , but it wud be very weird if it was that Edited January 3, 2017 by bubs79 Quote
bubs79 Posted January 3, 2017 Posted January 3, 2017 (edited) not sure if u can see anything in this python log , but this is just with armogomens mod only python.log update very weird but its working again , but not perfectly when I aim the numbers show up but when I release aim the number stay stuck on screen until chance aim view Edited January 4, 2017 by bubs79 Quote
bubs79 Posted January 5, 2017 Posted January 5, 2017 (edited) On 03/01/2017 at 6:30 PM, bubs79 said: @aslain one thing I have noticed is , in the middle of the crosshair on your screenshot I see the word light, wat is that ? as when I start a game I see the words light heavy and medium flickering at the right side of cross hair, when I switch to sniper its gone and I never see the words again even when highlighting a tank . any ideas on that? Edited January 5, 2017 by bubs79 Quote
Administrator Aslain Posted January 5, 2017 Administrator Posted January 5, 2017 It is armor penetration indicator built in Harpoon crosshair by default. Light armor, heavy armor , medium armor... Quote
bubs79 Posted January 5, 2017 Posted January 5, 2017 Just now, Aslain said: It is armor penetration indicator built in Harpoon crosshair by default. Light armor, heavy armor , medium armor... then that's not working for me properly then hmmm ill get a few screen shots Quote
Administrator Aslain Posted January 5, 2017 Administrator Posted January 5, 2017 It wasn't working for the OP as well. For whatever reason, since it all works on my pc. Quote
bubs79 Posted January 5, 2017 Posted January 5, 2017 as u can see the screen shot its there in middle right then it moves to the top and back , also I'm not aiming at anything ,soon as I go into sniper mode its gone lol Quote
Administrator Aslain Posted January 5, 2017 Administrator Posted January 5, 2017 Yeah seem buggy, maybe ask Lenya69, since it's his mod: http://forum.worldoftanks.eu/index.php?/topic/605342-0917-harpoon-update-22122016/ Make sure you are not installing anything else when approaching him. Quote
bubs79 Posted January 5, 2017 Posted January 5, 2017 1 hour ago, Aslain said: Yeah seem buggy, maybe ask Lenya69, since it's his mod: http://forum.worldoftanks.eu/index.php?/topic/605342-0917-harpoon-update-22122016/ Make sure you are not installing anything else when approaching him. I notice hes got an update out today Quote
Administrator Aslain Posted January 5, 2017 Administrator Posted January 5, 2017 24 minutes ago, bubs79 said: I notice hes got an update out today but it was update to damage indicator from him, I don't bundle it with his crosshair. Quote
bubs79 Posted January 6, 2017 Posted January 6, 2017 (edited) 3 hours ago, Aslain said: but it was update to damage indicator from him, I don't bundle it with his crosshair. yeh I just read his changelog update I got it working on its own through installer, must be another mod conflicting it Edited January 6, 2017 by bubs79 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.